Keep PCB production, component decisions, assembly and enclosure integration in one coordinated conversation.
Engineering before productionTwo approval checkpointsStart with the files you have
Bare-board flying-probe testing
PCB Fabrication
Approve the files. Then start the build.
A clear approval checkpoint between your design and the production floor.
Up to 32 layers, controlled impedance and HDI options.
Our approach & what to send +
The JEXPCB approach
Engineering before equipment.We review Gerber, drill and outline data, clarify stack-up and process notes, and raise file conflicts before fabrication.
Your approval is a production gate.You confirm the prepared PCB production files before the board enters manufacturing.
Ready for the next stage.PCB requirements stay connected to your assembly, component and enclosure plan.
Helpful for a quote Send what you have
Board dataGerber ZIP with copper, solder mask and silkscreen layers, drill files and board outline; revision and layer order if available.
Build requirementsQuantity, requested delivery date, material or Tg, board thickness, copper weight, surface finish and solder mask colour.
Special requirements, if relevantStack-up and impedance targets, panelisation, slots or special vias, critical tolerances, acceptance class and inspection/report requirements.
No process requirements specified?
Where your files and notes give no other requirements, we quote and produce to FR-4 · 1.6 mm · HASL · 1 oz copper after production-file approval. Any conflicting drawing or file requirements are clarified before production.
Missing a drill file, stack-up or process notes? Send the available design exports and tell us what is uncertain. We will identify the information needed for a confirmed build.
First article approval before mass assembly, with board, parts and testing coordinated.
SMT and through-hole assembly with AOI, X-ray and functional testing.
Our approach & what to send +
The JEXPCB approach
One coordinated build package.Gerber, BOM and placement data are reviewed together, so board and assembly decisions stay aligned.
First article before volume.Review and approve the first assembled article before mass assembly starts.
Testing matched to your product.Agree the inspection, programming and functional-test scope before the build; flag fixture, firmware and test-limit needs early.
Helpful for a quote Send what you have
Board + partsGerber files and BOM in XLSX or CSV: manufacturer, exact part number, package, quantity and reference designators.
Placement + assemblyXY / CPL / centroid file with reference, X/Y, rotation, board side, units and origin; assembly drawings, polarity notes, DNP parts and build variants if available.
Supply + scheduleBuild quantity, target date, and whether the project is turnkey, customer-supplied parts or a mixture.
Programming + testing, if availableFirmware and programming instructions, test procedure and pass/fail limits, fixture or connector details, and reference-board information.
Special finish + delivery needsCoating or cleaning, acceptance class, serialisation/traceability, labels and packaging requirements, where applicable.
No coordinate file or complete test plan yet? Send the files, CAD exports or board photos you have. We will flag gaps and agree the remaining production and test information with you.
Part-number review, traceable procurement and customer-approved alternatives.
Our approach & what to send +
The JEXPCB approach
Find gaps before buying.Review exact part numbers, packages, quantities, lifecycle status and lead-time risks before procurement.
Alternatives stay visible.Proposed substitutes are presented for your approval, with the relevant specification and availability trade-offs.
Think beyond availability.Plan delivery format, handling and the traceability or lot documentation your project needs, so the kit is ready for assembly.
Helpful for a quote Send what you have
Part listBOM or a simple list with manufacturer, exact MPN, quantity and package; reference designators help when sourcing for a PCBA.
Acceptable optionsApproved manufacturers or vendor list, substitute policy, electrical/temperature grade and any critical ratings.
Demand + timingPrototype or production quantity, target delivery date and repeat demand if known.
Packaging + documentation, if relevantReel, cut tape, tray or tube preference; date-code limits, moisture-sensitive handling, lot traceability and certificates/documentation requested.
Do not have an exact MPN? Share the function, ratings, footprint, datasheet or clear part photos. We can begin a review and discuss candidate parts before a purchasing decision.
Machining, finish and final integration planned around the product inside.
Enclosures, PCBA installation, wiring and final checks.
Our approach & what to send +
The JEXPCB approach
Start at the interfaces.Review board mounting, connector openings, cable routing and thermal or grounding interfaces together.
Finish is a specification.Clarify material grade, surface treatment, colour, cosmetic faces and critical fits before cutting metal.
Beyond the enclosure.Coordinate hardware, cables, PCBA installation, final assembly and the agreed final checks as one build.
Helpful for a quote Send what you have
GeometrySTEP or IGES model and a 2D PDF drawing with units, revision, critical dimensions, tolerances, threads and inserts, if available.
Material + appearanceMaterial/alloy and temper if needed; anodising, plating, powder coating, bead blasting or other finish; colour, texture, cosmetic faces and masking/contact areas.
Fit + performanceMating parts or PCB outline, mounting points, connector cut-outs, thermal interfaces and any sealing/IP performance target to review.
Box-build package, where applicableParts/hardware BOM, cable or harness drawings, assembly instructions, programming and test requirements, artwork/labels and packaging needs.
Quantity + timingPrototype or production quantity and target delivery date.
Only a sketch, partial CAD or sample photos? Start there. We will clarify critical geometry, material and finish choices before a final manufacturing quote.
We use necessary cookies to operate this website and remember your choices. With your permission, Google Analytics helps us understand visits and improve our services. Optional external content, such as Google Maps, may also use cookies. You can reject optional cookies or change your choice at any time. Your quote and contact requests do not require analytics consent.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.